diff --git a/doc/board/toradex/verdin-am62.rst b/doc/board/toradex/verdin-am62.rst
new file mode 100644
index 0000000..ac0e86b
--- /dev/null
+++ b/doc/board/toradex/verdin-am62.rst
@@ -0,0 +1,130 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+.. sectionauthor:: Marcel Ziswiler <marcel.ziswiler@toradex.com>
+
+Verdin AM62 Module
+==================
+
+Quick Start
+-----------
+
+- Get the binary-only SYSFW
+- Get binary-only TI Linux firmware
+- Build the ARM trusted firmware binary
+- Build the OPTEE binary
+- Build U-Boot for the R5
+- Build U-Boot for the A53
+- Flash to eMMC
+- Boot
+
+For an overview of the TI AM62 SoC boot flow please head over to:
+:doc:`../ti/am62x_sk`
+
+Sources:
+--------
+.. include::  ../ti/k3.rst
+    :start-after: .. k3_rst_include_start_boot_sources
+    :end-before: .. k3_rst_include_end_boot_sources
+
+Build procedure:
+----------------
+0. Setup the environment variables:
+
+.. include::  ../ti/k3.rst
+    :start-after: .. k3_rst_include_start_common_env_vars_desc
+    :end-before: .. k3_rst_include_end_common_env_vars_desc
+
+.. include::  ../ti/k3.rst
+    :start-after: .. k3_rst_include_start_board_env_vars_desc
+    :end-before: .. k3_rst_include_end_board_env_vars_desc
+
+Set the variables corresponding to this platform:
+
+.. include::  ../ti/k3.rst
+    :start-after: .. k3_rst_include_start_common_env_vars_defn
+    :end-before: .. k3_rst_include_end_common_env_vars_defn
+.. code-block:: bash
+
+ $ export UBOOT_CFG_CORTEXR=verdin-am62_r5_defconfig
+ $ export UBOOT_CFG_CORTEXA=verdin-am62_a53_defconfig
+ $ export TFA_BOARD=lite
+ $ # we dont use any extra TFA parameters
+ $ unset TFA_EXTRA_ARGS
+ $ export OPTEE_PLATFORM=k3-am62x
+ $ export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y"
+
+.. include::  ../ti/am62x_sk.rst
+    :start-after: .. am62x_evm_rst_include_start_build_steps
+    :end-before: .. am62x_evm_rst_include_end_build_steps
+
+Flash to eMMC
+-------------
+
+.. code-block:: bash
+
+    => mmc dev 0 1
+    => fatload mmc 1 ${loadaddr} tiboot3.bin
+    => mmc write ${loadaddr} 0x0 0x400
+    => fatload mmc 1 ${loadaddr} tispl.bin
+    => mmc write ${loadaddr} 0x400 0x1000
+    => fatload mmc 1 ${loadaddr} u-boot.img
+    => mmc write ${loadaddr} 0x1400 0x2000
+
+Boot
+----
+
+Output:
+
+.. code-block:: bash
+
+U-Boot SPL 2023.10-rc1-00210-gb678170a34c (Aug 03 2023 - 00:09:14 +0200)
+SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.1--v09.00.01 (Kool Koala)')
+SPL initial stack usage: 13368 bytes
+Trying to boot from MMC1
+Authentication passed
+Authentication passed
+Authentication passed
+Authentication passed
+Authentication passed
+Starting ATF on ARM64 core...
+
+NOTICE:  BL31: v2.9(release):v2.9.0-73-g463655cc8
+NOTICE:  BL31: Built : 14:51:42, Jun  5 2023
+I/TC:
+I/TC: OP-TEE version: 3.21.0-168-g322cf9e33 (gcc version 12.2.1 20221205 (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24))) #2 Mon Jun  5 13:04:15 UTC 2023 aarch64
+I/TC: WARNING: This OP-TEE configuration might be insecure!
+I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
+I/TC: Primary CPU initializing
+I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.1--v09.00.01 (Kool Koala)')
+I/TC: HUK Initialized
+I/TC: Primary CPU switching to normal world boot
+
+U-Boot SPL 2023.10-rc1-00210-gb678170a34c (Aug 03 2023 - 00:09:41 +0200)
+SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.1--v09.00.01 (Kool Koala)')
+SPL initial stack usage: 1840 bytes
+Trying to boot from MMC1
+Authentication passed
+Authentication passed
+
+
+U-Boot 2023.10-rc1-00210-gb678170a34c (Aug 03 2023 - 00:09:41 +0200)
+
+SoC:   AM62X SR1.0 HS-FS
+DRAM:  2 GiB
+Core:  136 devices, 28 uclasses, devicetree: separate
+MMC:   mmc@fa10000: 0, mmc@fa00000: 1
+Loading Environment from MMC... OK
+In:    serial@2800000
+Out:   serial@2800000
+Err:   serial@2800000
+Model: Toradex 0076 Verdin AM62 Quad 2GB WB IT V1.0A
+Serial#: 15037380
+Carrier: Toradex Verdin Development Board V1.1A, Serial# 10754333
+am65_cpsw_nuss ethernet@8000000: K3 CPSW: nuss_ver: 0x6BA01103 cpsw_ver: 0x6BA81103 ale_ver: 0x00290105 Ports:2 mdio_freq:1000000
+Setting variant to wifi
+Net:
+Warning: ethernet@8000000port@1 MAC addresses don't match:
+Address in ROM is		1c:63:49:22:5f:f9
+Address in environment is	00:14:2d:e5:73:c4
+eth0: ethernet@8000000port@1 [PRIME], eth1: ethernet@8000000port@2
+Hit any key to stop autoboot:  0
+Verdin AM62 #